WD UltraStar 10TB Enterprise HDD
Product Warranty :
Five Years MFR WtyBarcode :
0B42266WD UltraStar 10TB Enterprise HDD
Internal hard drive.
Technical specifications
| Manufacturer model | WUS721010ALE6L4 |
|---|---|
| Drive capacity | 10TB |
| Drive form factor | 3.5-inch |
| Drive interface | SATA 6 Gb/s |
| Drive speed | 7200 RPM |
| Data buffer | 256 MB |
| Sector format | 512e;512-byte logical,4096-byte physical; manufacturer supports conversion to4Kn |
| Average latency | 4.16 ms |
| Interface transfer rate | 600 MB/s maximum |
| Sustained transfer rate maximum | 273 MB/s /260 MiB/s |
| Nonrecoverable read error rate | 1 in10^15 |
| Load/unload cycles at40°C | 600,000 |
| MTBF | 2,000,000 hours; statistical population estimate at220TB/year and40°C |
| Annual failure rate | 0.44% |
| Availability | 24x7 |
| Idle/operating acoustics typical | 3.4/3.8 Bels |
| Power supply | +5V,+12V |
| Operating power typical | 9.2 W |
| Idle power | 8.0 W |
| Height | 26.1 mm maximum |
| Width | 101.6 mm ±0.25 mm |
| Depth | 147 mm |
| Weight maximum | 750 g |
| Operating ambient temperature | 5°C to60°C |
| Operating shock (half-sine2ms) | 70G read/write |
| Operating vibration5–500Hz | 0.67G RMS XYZ |
| Non-operating ambient temperature | -40°C to70°C |
| Non-operating shock half-sine2ms | 250G |
| Non-operating vibration2–200Hz | 1.04G RMS XYZ |
| HDD Capacity | 10TB |
| HDD Form Factor | 3.5-inch |
| HDD Interface | SATA 6 Gb/s |
| HDD Speed | 7200 RPM |